CDT HD High Definition Series of Component Speaker Systems

CDT introduces HD-6M incorporating a new parametric blend in an affordable package that puts deep, sweet bass in home or vehicle locations simply and easily. Suitable for enclosed or free air use in your vehicle, these drivers provide full, rich, extended bass below 38Hz simply mounted in a panel or deck with or without a sub enclosure. The air load is provided mechanically in the suspension or may be augmented with a back load by sub enclosure.

There is no free lunch and the trade-off is lower SPL limits and reduced sensitivity. If your listening tastes are for reasonable levels in smaller spaces these drivers provide optimum value and minimized installation cost. Why pay for performance and high installation costs if you do not need the high SPL?

Designed and built to deliver accurate and natural clean deep bass performance never heard before from a 6.5” driver.

CDT Audio HD 6MO Pro - 6.5" Professional Component System

Sound experience way over your expectations from a 6.5" component set.

All environment Professional engineered mid-woofer.
Just stunning performance super clean natural up-front sound stage

HD-6MO Pro 6.5" - "Contoured Dispersion Technology" mid-woofer is very smooth and efficient. The injection molded design is the most durable 6,5" woofer in the market, it handles the toughest car audio environment, designed to handle and withstand even the toughest marine and motorcycle environment. There is no comparison in the market to this extremely robust 6.5" mid-woofer design. The Kevlar/fiberglass cone material is among audiophile listeners considered the best for sound quality. Due to it’s extreme robust design this system carry a 10 Year limited warranty.
 

HD-6MO-Pro Professional 6.5” component system

HD 6MO Pro
Professional Component System

Technical specs and contents:
 

• 1 pr HD-6MO 6.5" Professional engineered 6.5" mid-woofer
• 1 pr EX-540 24dB Elliptic 2-way crossover
• 1 pr HD-100 1" silk tweeter
• Power handling: 200 watt RMS @ HPF 120Hz.
• Frequency response: 55Hz-20.000Hz
• Impedance: 4 Ohm
• Sensitivity: 88.8dB Mounting depth 4" woofer 1.6"
• Flush and surface tweeter housings

The carbon reinforced mix-fabric paper cones offer ideal stiffness and damping. The curvilinear cone shape prevents cone flex and break up. This provides clean mid-bass even at higher levels. The always-critical midrange frequencies are clear and precise with no distortion from "ringing." The midrange driver use real butyl surrounds, not merely a mixed butyl compound. This provides longer, more linear excursion, and a far longer life because it's UV resistant.

EX 550i
Elliptic “Transient Optimized 2-way crossover

Technical specs and contents:

• 1 pr EX-550i 4th/5th order 24dB design
• 5 level image tweeter attenuation
• Built-in crossover trim switch
• Built-in tweeter protection

HD 100
1.1 tweeter ferro fluid cooling

Technical specs and contents:

• 1pr 1.1” silk dome tweeter driver neo charged magnet structure
• 1 pr flush mount housing w/hardware
• 1 pr angled flush mount ring
• 1 pr flat surface mount cup
• 1 pr angled surface mount cup
• Cooled by ferro fluid
• Frequency response 1500Hz-20.000Hz
• Impedance 4 Ohm
• Sensitivity: 92.5dB
• Flush and Surface cups
• Flush mount hole 1 ¾”
• Flush mount depth ¾”
• Flush cup OD 2 ¼”