CDT CL Classic Series of Component Speaker Systems

CDT introduces CL-6M incorporating a new parametric blend in an affordable package that puts deep, sweet bass in home or vehicle locations simply and easily. Suitable for enclosed or free air use in your vehicle, these drivers provide full, rich, extended bass below 40Hz simply mounted in a panel or deck with or without a sub enclosure. The air load is provided mechanically in the suspension or may be augmented with a back load by sub enclosure.
There is no free lunch and the trade-off is lower SPL limits and reduced sensitivity. If your listening tastes are for reasonable levels in smaller spaces these drivers provide optimum value and minimized installation cost. Why pay for performance and high installation costs if you do not need the high SPL?
Designed and built to deliver accurate and natural clean deep bass performance never heard before from a 6.5” driver.

CL-6M

CL-6M 6.5” Subwoofer

CL-6M
CL-6M 6.5” Subwoofer 1 pr CL-6M 6.5” coated carbon reinforced cone subwoofer -

Technical specs and contents:
 

• 1 pr  6.5” subwoofer
• Frequency response 40Hz-2500Hz
• Power handling: 70-100W
• Impedance 4 Ohm
• Sensitivity: 81.65dB
• Mounting depth: 2.63” (66.8mm)
• Cone: carbon reinforced cone
• Magnet weight: 20 Oz
• Cone surround: rubber
• Voice coil: 1.0” (26mm)