CDT introduces HD-6MDVC incorporating a new parametric blend in an affordable package that puts deep, sweet bass in home or vehicle locations simply and easily. Suitable for enclosed or free air use in your vehicle, these drivers provide full, rich, extended bass below 2 (ported) also simply mounted in a panel or deck with or without a sub enclosure. The air load is provided mechanically in the suspension or may be augmented with a back load by sub enclosure.

If you’re listening tastes are for reasonable levels in smaller spaces these drivers provide optimum value and minimized installation cost. Why pay for performance and high installation costs if you do not need the high SPL?

Designed and built to deliver accurate and natural clean deep bass performance never heard before from a 6.5” Sudwoofer.

WHY 2 OHMS? Ohms law proves that when you reduce your resistance (impedance) by 1/2 you can double your amplifiers output (wattage). Imagine the implications.  Since most car sound systems are built around a speaker impedance of 4 ohms, a CDT 2 ohm system means you can buy a 30 watt per ch amplifier (rated at 4 Ohms) and get 60 watts per channel!  Here is another way you can look at it:  Say you were thinking about buying a small amp because your system needs a little more power.  Instead - upgrade to a CDT 2 Ohm system.  You'll double your available power, and you'll get a tremendous speaker upgrade as well.  It's like 2 upgrades for the price of one!

HD-6MDVC Woofer

A Truly Superior DVC subwoofer model: HD-6MDVC

This woofer will also be wired in 2 Ohm out perform any 6.5”in the market with incredible superior bass response and very smooth midrange response to meet a tweeter when used with EX-550i xover.

Great for a quick replacement and sound improvement for vehicles with Stock factory 6 1/2" DVC subs.  The sound is absolutely stunning in comparison to the stock sub drivers.

 

HD-6MDVC Cast 6.5” subwoofer

Technical specs and contents:
 

• Cast 2X4Ohm (1X2Ohm) 6.5” DVC subwoofer
• Frequency response 42Hz-4000Hz
• Power handling: 70-150W
• Impedance 4 Ohm
• Sensitivity: 79.74dB
• Mounting depth: 2.75” (69.9mm)
• Diameter: 6.5” (170mm)
• Cone: Coated non woven carbon fiber cone
• Magnet weight: 24 Oz
• Cone surround: rubber
• Voice coil: 1.0” (26mm) FS: 42.39Hz

Complete Tech Sheet