Universal Mounting Bracket

The bracket is designed to allow for many different mounting techniques.  It can be bent or cut and mounted in several different orientations to facilitate the proper placement and orientation of the Sirius radio being installed.  One common application is to pull a dash panel or console and secure the "fingers" of the bracket with self tapping screws behind the panel after bending or cutting it to place the Sirus radio in the chosen location and orientatin.  The elongated holes on the fingers can be used to shorten or lengthen the distance it protrudes from behind the panel.  After securing the Universal Mounting Bracket replace the panel removed earlier and check that there is enough clearance for the bracket and that it does not interfere with the fit of the vehicles panel

In some cases the Sirius radio cradle can be mounted directly to the Universal Mounting Bracket with the supplied screws.  In other cases it may be necessary to attach the swivel base to the Universal Mounting Bracket and then the Sirius radio cradle to the swivel base to accomodate proper positioning and orientation of the radio.  Once the appropriate orientation of the Swivel Bracket has been determined, tighten the center screw to secure it from moving.  Be careful not to over-tighten the screw as it can damage the Swivel Bracket

       Swivel Base Footprint: width = 1.8125", depth = 2"